Black mask DIY

Things you will need!!!
-2 little bowls
-activated charcoal powder (you can create your own by activating your lots on videos on this)
- nontoxic white school glue
-a old brush to apply it.( one that you dont mind ruining.) you can get some at the dollar store 
-mint extract or peppermind extract or any extract that you want really just use it sparingly a little drop is good.
-a wash cloth 
-toner
-cleanser
-a mirror 

Steps ! 
1. get ingredients 
(Activated charcoal powder ,white glue, and peppermint oil)
2. Mix all the ingredients together depending on how much you want
3. Wash your face with warm water.
4. Use a brush you dont care about just incase the glue dries on it.
5. Apply in one even coat every where you want it to remove any blackheads or your whole face depending on again what you want.
6. Wait 20 to 40 minutes for mask to dry COMPLETELY when the mask is dry you should not feel cold or be able to move the mask around and it should be completely matte and tightened on your face.
7. find or make a lose edge along the bottom of the mask.
8. Start to slowly pull the mask up (in a upward motion the slower you go the more black heads you will get.) 
9. Once you have the mask pulled off use a warm damp cloth to wipe away any left over pieces of the mask that didn't pull off.
10. Tone you face to close all of your pores.